Call a Specialist Today! 844-356-5140
Free Shipping! Free Shipping!

Dell Networking W-AP155 Access Points
Optimize client performance in high-density WiFi environments

Dell Networking W-AP155 Access Points

Sorry, this product is no longer available, Please, contact us for a replacement product!

Overview:

Dual-band, dual-radio APs offering wire-like data rates of up to 450Mbps per radio. The AP155 and AP155P each have four ports available to the wired network and a USB port to connect to 3G and 4G networks. The W-Series AP155P has two Power-over-Ethernet (PoE)-capable LAN ports that can be used to power an external PoE-enabled device, such as an IP phone.

  • Dual-radio, concurrent dual-band access points
  • 2x2 MIMO with two spatial streams and up to 300Mbps wireless data rate in 2.4GHz
  • 3x3 MIMO with three spatial streams and up to 450Mbps wireless data rate in 5GHz

Deploy wire-like performance

Blur the lines between wired and wireless performance with up to 450 Mbps data rate per radio, and help ensure fast and clear client performance with intuitive network resources allocation and spectrum analysis capabilities.

Provide outstanding audio and video quality

Maintain high-definition (HD) quality video and toll-quality voice across your wireless infrastructure with Dell Networking W-Series access points (W-APs) and centralized controllers.

Implement context-aware access policies

Provide differentiated access policy based on type of user, type of device being used, type of application being run, time and end-user location.

Confidently manage your WiFi networks

Securely administer Dell Networking W-AP WiFi network from a controller. In addition, use Dell Networking W-Series AirWave Software Management Suite to manage your networks.

Enhanced RF management

Build wireless networks that adjust to the RF environment. Dell Networking W-APs with Dell’s Adaptive Radio Management (ARM) technology ensure maximum client performance while enhancing stability and predictability of the entire WiFi network.

Networking W-Series Access Points:

Dell Networking Products
Dell W-Series Access Points
W-Series AP224/225 802.11ac Access Points W-Series AP224/225 802.11ac Access Points
W-Series AP224 (external antenna) and W-Series AP225 (internal antenna) are 802.11ac access points, supporting the new 5GHz industry standard for gigabit wireless data rates. These purpose-built 3x3 MIMO 802.11ac access points are designed to deliver blazing fast performance that is up to three times higher than comparable 802.11n access points. Dual-radio configurations enable flexible deployments:
  • 5GHz: 3x3 MIMO for 802.11ac, delivering data rates up to 1.3Gbps 
  • 2.4GHz: 3x3 MIMO for 802.11n, delivering data rates up to 450Mbps 

The AP224 and AP225 each include dual GbE ports to access wired backbones and are powered by Power-over-Ethernet 802.3at (PoE+) or an optional adapter.

W-Series AP274/275 802.11ac Outdoor Access Points  W-Series AP274/275 802.11ac Outdoor Access Points
W-Series AP274/275 access points are innovative and aesthetic designs that deliver Gigabit WiFi performance to 802.11ac mobile devices. These purpose-built access points are designed to survive harsh outdoor environments, including extreme high and low temperatures as well as persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. With a maximum data rate of 1.3Gbps in the 5-GHz band and 600Mbps in the 2.4-GHz band, the AP274/275 outdoor APs support concurrent dual-radio operation.
W-Series AP155/155P Wired + Wireless Access Points  W-Series AP155/155P Wired + Wireless Access Points
Dual-band, dual-radio APs offering wire-like data rates of up to 450Mbps per radio. The AP155 and AP155P each have four ports available to the wired network and a USB port to connect to 3G and 4G networks. The W-Series AP155P has two Power-over-Ethernet (PoE)-capable LAN ports that can be used to power an external PoE-enabled device, such as an IP phone.
  • Dual-radio, concurrent dual-band access points
  • 2x2 MIMO with two spatial streams and up to 300Mbps wireless data rate in 2.4GHz
  • 3x3 MIMO with three spatial streams and up to 450Mbps wireless data rate in 5GHz
W-AP134/135 Access Points  W-AP134/135 Access Points
Enterprise-grade W-Series AP134 (external antenna) and AP135 (internal antenna) are the highest-performing W-Series 802.11n dual-radio indoor access points, designed to deliver data rates of up to 450Mbps per radio, up to 900Mbps total for denser environments.
W-Series AP114/115 Access Points  W-Series AP114/115 Access Points
W-Series AP114 (external antenna) and AP115 (internal antennas) are high-performance, dual-radio 802.11n access points designed to deliver data rates up to 450Mbps per radio, suited for medium density deployments.
 W-AP104/105 Access Points W-AP104/105 Access Points
W-Series AP104 (external antenna) and W-Series AP105 (internal antenna) are enterprise-grade dual-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total for medium density deployments.
W-Series AP103 Access Points  W-Series AP103 Access Points
W-Series AP103 access points provide cost-effective dual-band coverage in medium-density enterprise WiFi environments while minimizing interference from cellular networks. These compact APs deliver wireless data rates up to 300Mbps per radio employing 802.11n technology with two spatial MIMO streams. The AP103 features a 2.4-GHz and a 5-GHz radio, each with 2x2:2 MIMO and two integrated omnidirectional down-tilt antennas per radio.
 Networking W-AP175 Outdoor Access Points W-AP175 Outdoor Access Points
Enterprise-grade family of mainstream dual-radio 802.11n outdoor access points designed to deliver data rates of up to 300Mbps per radio, up to 600Mbps total. Ideal for campuses, industrial parks and other harsh, outdoor open-air environments, W-Series AP175 access points can be powered via PoE, AC or DC power sources and include convenient wall and mast mounting options as well as a solar shield.
 W-AP92/93 Access Points W-AP92/93 Access Points
W-Series AP92 (external antenna) and W-Series AP93 (internal antenna) are entry-level, enterprise-grade, single-radio 802.11n indoor access points designed to deliver data rates of up to 300Mbps.
 W-AP93H Wired + Wireless Access Point W-AP93H Wired + Wireless Access Point
A special-purpose 802.11n indoor access point with built-in 4-port fast Ethernet switch designed to deliver wireless data rates of up to 300Mbps. W-Series AP93H is specifically designed to be mounted over a network wall socket. Mounting kits sold separately.
 W-AP68 Access Point W-AP68 Access Point
Designed to deliver data rates of up to 150Mbps for organizations that are looking for a basic enterprise-grade 802.11n access point.

Compare High Performance:

Legend: S —Standard AO — Available Optional N — Not Available

W-Series Access Points High Performance Comparision Specs
  W-AP114 /
W-AP115
W-AP134 /
W-AP135
W-AP224 /
W-AP225

W-AP274 /
W-AP275

Data rate 450 Mbps
3x3 MIMO
900Mbps (450Mbps each radio) 1.3 Gbps
3x3 MIMO
802.11ac
1.3 Gbps
3x3 MIMO
802.11ac
Radios Dual radio, 5-GHz and 2.4-GHz 802.11n 3x3:3 Dual radios: Simultaneous operation in 2.4 and 5GHz band. (Concurrent operation of both radios in the same band is not supported.) Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n indoor Dual radio, 5GHz 802.11ac and 2.4GHz 802.11n outdoor
Operating frequencies 2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
2.4 to 2.5GHz, 5.150 to 5.950GHz with DFS support 2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
2.4000 GHz to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.875 GHz
Antennas 10/100/1000BASE-T Ethernet network interface (RJ-45)
Auto-sensing link speed and MDI/MDX
802.3az Energy Efficient Ethernet (EEE)
PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+
W-AP134: three RP-SMA for external
dual-band antennas
W-AP135: six internal
omni-directional, dual-band
W-AP224: Three RP-SMA connectors for external dual-band antennas
W-AP225: Six integrated down-tilt omni-directional antennas for 3x3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. 
Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225
AP-274: Six N-type female connectors for external antennas
AP-275: Six integrated omni-directional antennas for 3x3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of AP-275.
Network interfaces DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length
USB 2.0 host interface (Type A connector)
Serial console interface (RJ-45, TTL levels)
Two 100/1000Base-T Ethernet Auto- sensing MDI/MDX. Supports MACSec Encryption, 802.3az Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
Auto-sensing link speed and MDI/MDX
Load balancing statement TBD
MACSec encryption and 802.3az EEE
One PoE+ PD port 10/100/1000BASE-T Ethernet network interface (RJ-45)
One port 10/100/1000BASE-T Ethernet network interface (RJ-45)
Other interfaces Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source Console interface (RJ45) DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5mm length
USB 2.0 port (Type A connector)
Serial console interface (RJ45, TTL levels)
Serial console interface (micro USB)
Power over Ethernet (PoE) interfaces Power sources sold separately
Direct DC source: 12 Vdc nominal, +/- 5%
48V DC 802.3af or 802.3at or PoE+ interoperable with intellisource PSE sourcing intelligence (both ports) POE-PD: 48 Vdc 802.3af POE or 802.3at POE+ Power over Ethernet (PoE): 48 Vdc (nominal) 802.3at-compliant source
Power interfaces Maximum power consumption: 13 watts, plus up to 2.5 watts for attached USB device 12V DC, 1.25A Direct DC source: 12 Vdc nominal, +/- 5%
Power over Ethernet (POE): 48 Vdc (nominal) 802.3af or 802.3at compliant source
AC power interface; power cords sold separately
Power consumption   15 Watts (maximum) 15W, plus up to 2.5W for attached
USB device
23 watts
Environmental Class Indoor Indoor, plenum‑rated Indoor Outdoor; Operating Altitude: 3000m; Chassis Rating: IP66 and IP67; Wind Survivability: Up to 165 mph; Shock and Vibration: ETSI 300-19-2-4 spec T41.E 4M3
Operating temperature 0° C to +50° C
(+32° F to +122° F)
0°C to 50°C
(32°F to 122°F)
0° C to +50° C
(+32° F to +122° F)
-40° C to +65° C
(-40° F to +150° F)
Humidity 5% to 95% non-condensing    5% to 95% non-condensing 5% to 95% non-condensing

Pricing Notes: